How to Program a Subaru Replacement Key

The dealer will cost you to program a replacement key fob in the event that you lose it or it ceases to function. Locksmiths can do it for less.

This is a frequent issue. The first thing to examine is the battery. Replace it with a replacement key fob subaru with the same size, type, and voltage as the original.

How to Replace Your Keys

If your subaru key fob programming is equipped with a smart key or a transponder keys, you will have to visit a dealer to program it. If your subaru key programmer (read this blog post from Airsoftmarkt) has a non-transponder steel key, then you are able to do it yourself with a little bit of work and a few tools that most people will already have at hand.

First, open the key fob's exterior case using a metallic key and a flathead screwdriver. The small tab is located in the seam between front and back of the key fob's encasement. This will release the smaller, inner casing that houses the battery. Open the casing with the screwdriver, and look for the 2025 batteries that are new inside. Remove the old battery and insert the new one. Connect the two sides back together.

Close all the doors, excluding the driver's. Turn your key to the first position, where the electrical systems start to turn on, but the engine remains off, and then return to the off position. Repeat this 10 times in rapid succession, and you should hear an alarm sound. After this, you will be given 45 seconds to enter the 8-digit serial number into your computer in the vehicle using the lock/unlock buttons on the driver's side door. The dome light will flash to confirm successful programming.

Remote Keys

A remote key is a tiny remote control used to unlock and start the engine of your car. It can also be used to control the alarm system, lock and unlock the doors, and even open the trunk. It can be programmed using a key fob, or via the mySubaru application. In some states, it is possible to purchase an additional key and have it programmed to comply with the laws that require cars to not be left running when being parked.

A lot of dealerships offer remote start options, but this service isn't always affordable for all. Locksmiths can provide remote start services at your location. The disadvantage of hiring a locksmith is that their rates are usually higher than those that dealerships charge.

Before you employ locksmiths who offer remote start services that are suitable for your vehicle, make sure they're insured and licensed. It is also important to ensure that they have the tools to do the job. This will ensure that the locksmith is able to program your keys properly. If they are not able to do so, you may have problems in the future, when trying to start your car or even locking yourself out. Also, ensure to confirm that the emergency key they cut for you is working on the door cylinders and trunk to avoid any issues in the future.

Transponder Keys

Subaru cars are equipped with a variety of useful technology features that help you stay connected. STARLINK Multimedia allows you to stream content and listen to music while driving.

The key fobs for Subaru Forester Outback Crosstrek WRX and STI include a tiny chip which transmits a message to the engine computer in your car when you use them to open or start it. This chip has a unique code that is linked to a specific vehicle.

If you've lost subaru keys your key fob or if it's not functioning properly, take it to a locksmith or dealer that has an code to reprogram your chip to match your subaru impreza keys. They will also make you new keys that can work in both trunk and door locks, which means you can still enter your car if your key battery is dead.

If you're visiting an auto dealer or a locksmith make sure to inform them your car's VIN (Vehicle ID Number) and the year. The VIN is located on the dashboard, in a prominent place and can help them verify that they have the correct key fob for your Subaru and the correct key to program it.

Keyless Entry

If you're using a Subaru that has keyless entry, you'll be able to open your car doors and start it from anywhere. If you're planning to go on a hike and don't want to take your keys, or to warm up your engine prior to driving through snow, this can be an extremely useful feature.

This feature is only available when you have an electronic fob that is smart or a replacement key. The process to program it is easy and quick. You'll be required to know the first 8-digit number that appears on your key fob, so make sure to note it down or write it down in case you're having difficulty remembering.

Once you have created your pin code, you will be able to unlock the car doors by pressing a button on your key fob or trunk release or liftgate locks. This allows you to leave your keys in the car while you go on an excursion or take your children to play, and when you come back, you can enter the five-digit code to unlock the doors and get into.

If you're interested in adding keyless entry for your car, there are kits available for installation by yourself. A professional installation is recommended to ensure that the system is installed correctly and functions according to the specifications.