Door Handle Replacement

Door handles may seem like an insignificant thing however, if you don't like the appearance of the handles or are finding them difficult to use, it's worth replacing them. With a bit of patience, you can install the new handle in no time.

Modern door handles are equipped with cover plates that hide the screws to give them a beautiful appearance. However, you'll need to attach them separately if the new handle doesn't have them attached already.

Removal of the old Handle

Door handles aren't just an an important aesthetic addition to your home, but they're also crucial for safety as they let you lock and unlock your door. Over time, the door handle may begin to lose its grip or feel a bit loose. It might also begin to look worn out and old. This is a sign that it's time to replace the door handle.

One of the first indications that your door handle requires replacing is when it becomes difficult to operate. This is a problem because it means you can no longer lock or unlock your door, which could be an security risk to you and your family.

Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door handle could be quite dangerous, especially when your children or elderly family members are unable to open it and end up trapped within. It's simple to replace a broken handle on a door.

Modern door handle lock repair handles are typically standard sizes and should fit any door. If you are not sure if the new door handle you are buying will work, remove the old one and take measurements of its holes in the housing. This will let you purchase the right size door handle.

It is easiest to take off the old door handle by taking it off from the door. Usually it is a matter of using a screwdriver. Some door handles come with an enclosure plate that hides the mounting screws. It is necessary to remove this to get to the screws. Once you've removed your old handle, make an outline of how the spindle is attached to ensure that you can make sure it is aligned when you put in the new one.

You can also remove your door handle by unscrewing it from the latch mechanism. This is usually done with the screwdriver, but you'll need to find the small latch, which should be just to the left of the trim piece. After removing the latch, unscrew the handle and strike plate. Then, remove the latch from the door's edge.

Take off the Strike Plate

When replacing the handle, you'll want to replace the latch plate, which holds the hole that the door's latch hooks into when it closes. The packaging that the new handles are packaged in will include two latch plates: a rectangular one and circular (see the diagram above for the parts of the door handle). If your current latch plate has rectangular, swap it to a circular one so that the latch hooks onto the strike plate in a way that makes the handle more comfortable to use.

The first step is to loosen the screw that holds the latch plate in place. These screws can be quite tight, and may require some force to loosen. It is helpful to have a second person help with this task if you can.

The latch plate should easily come out of the repair door handle once the screws have been removed. If it is stuck or doesn't move using a nail file to scratch around the edges of the latch plate. This can sometimes open the plate.

Now you can prepare the new strike plate to be installed. Attach the latch plate to the door jamb using the screws that were included with the new handles. Be cautious not to tighten too much the screws, as this could damage the strike plate.

If you are not sure whether the latch plate is in the proper position, shut and open the door to see if it latches and closes properly. If not you'll have to adjust the strikeplate upwards or down, or forward or back until the door closes properly.

If the door is still moving or jiggling, then you may need to enlarge the latch hole in the strike plate. This is more common on older doors. It could be caused by wear and tear hinges that are too shallow, the wrong size latch, or a damaged strike plate. If this is the situation you can use a metal file instead of a chisel, or hammer to adjust the strike plate.

Take off the Latch

The latch is the metal piece that is angled that slides in and out of the hole on the inside edge of your door. When you turn the handle, it pushes this latch forward, allowing you to open the door. It also hooks in an opening in the door frame to ensure that the door stays closed. If your door is wiggles when you close it, replacing the latch could be all that's needed to correct the issue.

It's hard to see the screws that attach the latch to the door, however there's usually a tiny slot on the trim plate that lets you to insert a screwdriver into the slot and remove it. After you've removed the trim plate, it should be easy to remove the latch as well as the remaining bolts that hold the spindle and latch in the position.

If the latch cannot be easily removed then use a paperclip tool to take it off the handle mechanism. Place the item in the latch's slot that is recessed and gently turn or jiggle it until you feel the latch and handle start to split. You may need to repeat this several times before the latch comes loose enough to pull out.

After the old latch is removed, you should be able to insert the new latch into the slot without any issues. Make use of the new screws to attach the latch to the strike plate or door frame. Make sure it's properly positioned in the slot, aligned with the screw chambers.

Before you install the new handle, be certain to measure your existing backset (the distance from the center of the big hole on the front of the door to the edge). Make sure that the size of the latch of the new handle is in line with the measurement.

If you're replacing the latch or handle, or if your old lock cylinder is damaged then you will need a new one. If you're not changing locks, a new lock should fit in your existing recess and work with your current keys. Choose a latch that has rectangular cover plates to match your existing handles.

Take off the cover plate

Door handles can start to look shabby over time However, if you replace them with a contemporary lever-on-rose designs, it's an easy and quick DIY and decorating project that will improve the overall look of your home. You can purchase complete sets with matching the escutcheons as well as privacy adaptors and escutcheons.

The first step to replace the door handle inside is to remove the cover plate or rose, which covers the screws and the mechanism within. Find an release tab on the plate and use a flathead screwdriver to remove it from the knob. It may have an opening on one edge or be held by a pin.

Remove the screw that is holding the interior handle and place it aside when the cover plate has been removed. Remove the screws that hold both the outer and inner plates. You can loosen them by using a Philips Screwdriver. Then, take the inner plates and latch plate from the upvc door handle repairs and set them aside.

Not all doors have this gap. If yours does not, you will need to drill a new hole in the door handles repair near me. The process for doing this is the same procedure for opening a door with locks, but you'll have to be extra careful not to harm the door or frame.

The installation of new door knob screws is required after the holes have been made. Choose the same size as your old screws to prevent getting the handle that is too loose or tight. Installing a new latch and strike rod is also mandatory. These aren't included in all door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic choice if you're in the market of a premium interior door handle replacement set. It's a factory-fit and has received hundreds of five-star reviews from delighted customers. It's an excellent option to replace worn or damaged interior repair door handle hardware on your Chevy.