Sliding Patio Doors Repair

Patio doors that slide open are ideal for enjoying your outdoor space, however they can become difficult to open and close. This could be due to a variety of issues, such as dirty tracks or improperly aligned rollers.

Clean the track first and lubricating the rollers. You can also utilize the adjustment holes on the lower part of the movable panel to re-align your rollers.

Tracks that are damaged or dirty

A sliding door that doesn't slide as it should can be due to a dirty or damaged track. Over time dirt and grit, as well as rust can build up blocking the track from moving smoothly. The solution is to clean the track thoroughly using an abrasive and mild detergent. This task should be performed regularly to ensure smooth operation and to make sure that costly repairs are not required in the future.

A door that is leaky is another common issue that requires prompt attention to prevent the growth of mold, water damage and structural degradation. Often the problem stems from damaged weather stripping or misaligned doors. These can be fixed by replacing old weather strips and by aligning the door.

Another common problem that can be resolved with some DIY work is the problem of rollers that veer off their tracks. Get a partner to assist you with this task as the door could be heavy. To move the rollers around to the right position, sit inside the house and lean one of the panels towards you. To prevent the panel from falling, put it on sawhorses once it's been lifted off the bottom track. Then, loosen each of the roller's screws and pry them with a screwdriver. Then, you can clean any dirt that has accumulated between the wheel and tracks. Clean each wheel with denatured alcohol on a cloth. Reposition the wheels on their tracks and attach them once more.

It may be possible to straighten bent sections of track with a mallet made of rubber and a piece of wood. If the bent section is near hinges or has the potential to cause further damage, you should contact an expert.

Misaligned Rollers

If your sliding door has difficulty sliding, it's likely that the roller wheels are not aligned correctly. The wheels may be dirty, rusted, or their bearings worn out. This friction causes the door to snag and grind when it's opened or closed. This can also cause noises that squeak.

Fortunately it's a simple fix. You don't need to remove the door to access the wheels since they are mounted on a bracket which is adjustable. Utilize a screwdriver to find the adjustment holes on the frame (usually either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise turn lowers it. Continue adjusting the door until it opens and closes smoothly.

It's important to adjust the wheels prior adjusting the latch. The latch hooks have to line up with the strike plate (the opening through which the latch locks) to allow the lock to work properly. If you don't do this, the latch could open or close while you're away from the room.

Patio doors that slide are an investment, and ensuring they are working properly will keep your family safe tilt and slide patio door repairs near me secure. By fixing common issues such as damaged tracks, rollers or handles, you can avoid costly repairs in the near future. For more help with your patio sliding doors repair doors, call our team. We can evaluate your sliding patio door repair needs and help you keep it in good shape. Our experts are also able to assist with any replacement parts you may need.

Damaged or loosely held door frame

Sliding patio doors are a great addition to any home. They offer an attractive and convenient alternative to swing-open or hinged patio doors repairs near me door options. But, just like any other hardware, they may experience a variety of problems over time. Many of these issues are fixable with a bit of DIY expertise.

A common issue that affects sliding patio doors is gaps in the frame. This could be caused by a variety of factors, including rollers or tracks that are not aligned properly or a damaged track door, or a bowing frame for the door. In most cases, the problem is easily solved by removing the doors and reconnecting the track. This must be done with care so as not to cause damage to the track or frame.

In certain situations, it may be necessary to replace the entire track. This is easily done with a universal replacement kit that is available at most major hardware stores. These kits are easy to install and will get your door functioning properly again in no time at all.

It is crucial to regularly inspect your sliding door frame and hardware for signs of wear and tear, such as loose screws or bolts. They can usually be tightened with a screwdriver, or wrench and is a simple and efficient DIY patio door maintenance process. It is also essential to lubricate the rollers and tracks of your patio door to ensure smooth operation and prevent premature wear.

Patio doors are usually the main entrance to the backyard and outdoor living area for a lot of homeowners. They need to be able to function properly in order to ensure the safety of their home and offer security. By making the effort to implement these easy maintenance tips homeowners can extend the life span of their sliding patio doors and reduce expensive repairs or replacements.

A faulty handle

Sliding patio doors provide a great way to access your backyard and to enter your home, however they can be difficult to operate if they are damaged or misaligned. A defective handle can cause the door to not open or close correctly. Repairing a damaged handle can be done at home.

In many cases the loose grip is a result of screws that have slipped out of the backplate. To fix the issue, tighten the screws on the inside of the handle with a screwdriver. If the handle is still loose, it could indicate that the threads have worn out and require replacement.

Or, a damaged latch could be the cause. This is more likely to happen if the latch is made of plastic, not metal. You can try making sure the latch is lubricated if it is not engaging or turning. If not, you might require replacing the lock entirely.

Finally, the handle itself may become difficult to operate in the event that it is broken or cracked. If this is the case, it will be necessary to replace it with a brand new handle that matches the style of your sliding patio door.

If your patio doors are old and outdated or brand new, Feldco can help you get them back on the right track. We offer high-quality doors in different sizes and styles that can be installed to match your home perfectly. For more information about our doors, contact us now! We proudly serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Faulty weatherstripping

It's time to change your weather stripping if see light in the windows and doors or sense a draft pulsing at the window or door. These strips create an airtight seal that prevents unwanted water, air, and pests from entering your home. It also keeps your conditioned and heated air in, saving you money on your energy bills all year long.

It may have lost its strong, bouncy seal due to age. This can be identified by using a dollar bill and running it under the seal between the top of the door frame as well as the below the jamb of the door where they overlap. If the dollar bill slides effortlessly between the seal and the door, it's time to replace the weather stripping.

If you replace only the worn-out portion of weather stripping, it could cause problems in the future with the seal. It's far more effective to replace the entire stripping so that you are able to rest knowing your door is properly sealed once again.

Follow our DIY guide to weather stripping to put the right material on your sliding patio door, and frame to ensure a secure and long-lasting seal. It's a great method to fix your door and save on your energy bill, so don't wait until it's too late. Your wallet and your home will thank you.